国产目拍亚洲精品_亚洲一级毛片无码真人久久_亚洲人a成www在线影院_国产99精品视频_桃花视频免费观看完整版高清_惠民福利亚洲AV性色永久无码精品_精品中文字幕在线_可以看三级的网站_经典无码中文字幕_了解最新亚洲九九九

當前位置:網站首頁 > 產品展示 > 截止閥

2022

01/07 14:16:32
分享
  • 分享到微信朋友圈

YJ41W/Y氧氣截止閥

溫馨提示:歡迎訪問凱工流體官網,如需訂購請來電咨詢,謝謝!
聯系人:林先生
手 機:13600685351
電 話:0577-66996166
傳 真:0577-66996168
  • 產品描述

型號:YJ41W/Y

公稱壓力:1.0MPa~4.OMPa適用溫度:200℃

材質:CF8、CF3、CF8M、CF3M


氧氣管路閥專用介紹

Introduction to special valve for oxygen pipeline

       氧氣管路專用閥門是根據氧氣管網運行特點以及考慮氧氣介質的易燃易爆的特性,以安全可靠和性能優越為設計原則,并參照中華人民共和國冶金工業部制定的《氧氣安全規程》的規定而設計、制造的確保氧氣管網安全運行的專用閥門。

       閥門類型:按照冶金工業部《鋼鐵企業氧氣管網的若干技術規定》的規定采用截止閥。

       主體材料選用不銹鋼或阻燃性極好的銅合金,密封面為本體或堆焊D802,其余內件采用不銹鋼或銅合金;傳動部位的潤滑采用不可燃的潤滑脂,并標有明顯的禁油標記。

       在結構上,支架采用全閉封,并有導除靜電裝置,閥桿上配有防塵帽。

       我公司的氧氣管路專用閥,自投放市場以來深受各大、中型鋼鐵廠、制氧廠、石化廠氧氣管網的依賴!

       The special valve i designed & produced so as to ensure sare operation of oxygen pipe networkon the basis of design principle of Safety, ReliabilityandOutstanding Performance according to operation nature of oxygen pipe network and infammable & explosive nature of oxygen medium,in which in accordance with Safety Regulation for Oxygen enacted by State Ministry of Metallurgical Industry.

        Type of valve: Stop valve is employed in accordance with CertainTechnical Regulations for Pipe Network in SteelCorporations enacted by StateMinistry of Metallurgical lndustry.

        Stainless steel or copperallay is employed for main material while Body or bead welding D802 is adopted for sealing surlace, in adition,stainlessor copper alloyis also employed in the remaining trims; furthermore,incombustible grease is used for lubrication of gear parts,in which is labeled with

Oil Forbidden.

         As per its structure,Full seal isemployed in the stand with device of removing static electricity while dust-proof cap is equipped on the rod.

         Our special valve has been well received bylarge/middle steel plants, oxygen factories and  Petrochemical plants, in which is employed in theiroxygen pipe network.


氧氣管路閥專用閥門特點

Characteristic

1、對于公稱壓力PNa1.6MPa、DN125~200采用內旁通結構;DN250-~50O采用帶外旁通閥結構。其目的是減小閥前、閥后的壓力差以避免高流速、高沖刷以及防止產生高溫,從而保證了氧氣管網的安全運行,同時也減小了操作力矩

2、介質流向:PN≥1.6MPa、DN≤100介質由閥瓣下方流入閥瓣上方(即低進高出),DN≥125介質由閥瓣上方流入下方(高進低出)。對于DN≥125的閥門采用介質高進低出的流向,一方面是內旁通閥結構上的需要,另一方面由于介質壓力的作用使閥門的關閉力大大減小。

3、該閥設有導靜電安全裝置,可避免因靜電產生火花。

4、與普通截止閥相比,氧氣管路用截止閥的支架部分采用全封閉式結構,且壓緊填料時可以打開支架上的防護蓋板,起到了防油防塵的作用。并有明顯的禁油標記。

5、全部零件采用嚴格的脫指處理。

1. Inner bypass structure is adopted for the nominal pressure ranging PN≥1.6MIPa,DN125~2Q00;outer by pass valve for Dn250~5600, so as to reducepropost-vave pressure with a view to avoiding high strength, high scour and preventing from high temperature, with which guarantees safe operation foroxygen pipe network the moment reduces operating torque.

2.Flow diection for mediuom:.PN≥1.6MPa, Dn≤100 are to beused to the condition that the medium is flowed from underside to upside (i.e.lowintlowand high ouffow) whileDn≥125for the condition offiowing from upside to underside (i.e.igh inflow and low outlow), the reason for thelatter one can belisted as follows:Firstly, needs of innerbypass valve;Secondly , the onlofforce has been greatly reduced caused by medium pressure.

3.The valve is equipped with safe device for removing static electricity , with which can avoid producing fire by static electricity.

4.Compared with normal stop valve, the stand of this special valve adoptsfull-sealed structure, in which can open saieguarding cap on the standwhen pressing fillings with a view to preventing from oil & dust, the obvious symbol of Oil Forbidden is labeled therein.

5.The whole components has been degreased firmly.


安裝、使用、維護注意事項Points to note (Installation, Operation & Maintenance)

1、安裝時注意閥體上箭頭方向與介質流動方向一致。

2、閹導線擰在兩側法蘭的接地螺栓上,并將其接地,導除閥門上內的靜電。

3、操作閥門時手輪順時針旋轉閥門關閉,逆時針旋轉閥門開啟。對帶有內旁通結構的氧氣閥開啟時,先逆時針旋轉手輪打開副閥瓣,待閥門前后壓力差減小到O.3MAPa時,再繼續旋轉手輪打開主閥;對帶有外旁通閥的氧氣閥開啟時,首先打開旁通閥,待閥門前后壓力差減小到0.3MPa時,再打開主閥。關閉時先關主閥后關旁通閥。

4、該閥為全關、全開型。操作時應緩慢進行,并不得當調節閥用。

5、維護時傳動部位涂不可燃的潤滑脂。

6、其余事項按冶金工業部《氧氣安全規程》和《鋼鐵企業氧氣管網若干技術規定》執行。

       本公司除生產氧氣管道用截止閥外,還生產氧氣管道用止回閥、球閥、儀表閥等閥類和配套法蘭、管件。材質有不銹鋼、銅合金兩大類,歡迎廣大用戶根據需要選用。

1. When installing, the arrow direction on the valve body should accord with the flow direction of medium.

2.The conducting wire should be screwed to the ground bolts on both sides'flange and grounded so as to remove the static electricity on the valve.

3.CloselOpen when rotating hand wheel clockwise/anticlockwise:When opeming the oxygen valve equipped with inner bypass structure,rotates thehand wheel anticlockwise to open assistant disc until the pressure balance between the front and the back of the valve at 0.3MPa, then continues the rotating operation to open the main valve; as per outerbypass valve, opens bypassvave until he pressure balance at 0.3MAPa. then continues the rotatingthe main valve should be closed before bypass valve.

4.The valve employs full open/close: It should be operated slowly and can not be employed as regulating valve.

5.The incombustible grease should be smeared on the gear when maintaining.

6.The additional items can be operated in accordance with SafetyRegulation forOxygen and Certain Techica Regulations forPipe Network in SteelCorporations enacted by State Ministry of Metallurgical Industry.

       Besides stop valve for oxygen pipeline, the valves such as the check valve , ball valve & meter valve for oxygen pipeline are also available in thecorporation while coupled flange & pipe fitting are supplied, in which stainless steel & copper alloy are used fortheir materal welcome to purchaseourproducts.

                                                                                                                                31/KAIGONG VALVE


應用規范 Application Norm

1、設計制造按GB12235-89

2、結構長度按GB12221-89

3、法蘭尺寸按JB/T79-94

4、閥門檢查和試驗按GB13927

1. Design Manafacfure According to GB12235-89

2.Face to Face According to GB12221-89

3. Flange Dimension According to JB/T79-94

4. Valve Check and Test According to Gb13927


結構Structure

1、產品所有零件均經脫脂處理,嚴格禁油;2、產品采用密封包裝,防止?jié)窨諝夂碗s質進入閥內;3、其它技術規范按《鋼鐵企業氧氣管肉的若干技術規定》。







為什么選擇我們

浙江凱工流體設備有限公司(原永嘉凱工閥門有限公司)是一家致力于科研、制造、銷售為一體的的企業。先后通過ISO9001企業體系認證、取得了中華人民共和國特種設備(壓力管道元件TS)制造許可證,美國API607球閥防火證書。

常見問題

  • 公司主要生產哪些產品?
    公司主要供應軸流式止回閥、不銹鋼系列閘閥、截止閥、止回閥、球閥、低溫閥、等系列閥門。
  • 當我需要報價時,我應該提供哪些信息?
    通常情況下,請將您所需要的產品名稱及型號發送給我們,例如:型號、尺寸等,以便我們可以準確報出價格,以便滿足您的需求。
  • 所需閥門的規格要求可以定制嗎?
    可以定制,請將您所需要定制的閥門詳細要求發給我們。
  • 如果我急需這些閥門,多長時間供貨?
    如果您急需要訂購閥門,我們可以為您調貨處理或緊急安排生產,爭取短時間內為您發貨。
更新時間:2022-01-07 14:16:32  點擊次數:
本文鏈接:http://kdni.cn/product/Pro-155.html
上一篇:YJ41W/Y氧氣截止閥 下一篇:YJ941W/Y電動氧氣截止閥

推薦產品

    聯系我們
  • 浙江凱工流體設備有限公司
  • 林先生
  • 0577-66996166
  • 永嘉縣甌北街道安豐工業區青峰路387號
?2022 浙江凱工流體設備有限公司 版權所有   浙ICP備2021001993號-2 浙公網安備33032402002509號 網站地圖 | 技術支持:云鼎科技
返回
上頁